About the Equipment List Page

This page of the dashboard shows all of the equipment being monitored by FitMachine sensors.

How can it help you?

This is our most commonly used page on the FitMachine Dashboard. This page is used to look at your entire deployment to understand what is happening with your monitored equipment.

This page can help you to prioritise which equipment needs your maintenance attention which can help to reduce breakdowns, reduce downtime and reduce costs.

How does it work?

The default ordering of the page is to have the equipment with the worst condition at the top, however, you can click the arrows next to each heading to reorder the equipment. For example, resorting into alphabetical order via Equipment Name. 

The information that you can find on this page includes:

FitMachine List Page 2022

Naming information

Site Name: The location of the plant

Sub-Area Name: The location within the plant that the equipment is

Equipment Name: What you call the piece of equipment

AI information

Learning progress: How far through the learning/calibration period that the FitMachine sensor is.

Condition: This slider indicates the current health of your asset. The further away from the green the slider is, the further the asset's condition has deviated from its learned baseline. It’s useful for gathering real-time insights into the health of your fleet whenever you need it and alerting you and your team when an issue arises.

Degradation: The rate of change calculated by the AI. Degradation is useful when deciding which out of a series of unhealthy assets should be inspected or maintained first.

Measured Data

Vibration: shows you the most recent RMS measurement

Temperature: shows you the most recent temperature measurement

Calculated information

Utilisation: Calculated based on how often the equipment has been above the running cut-off in the last 4 weeks (and thus considered to be running). 

Inferred Power: The utilisation multiplied by the power rating of the equipment to approximate how much power is being used. If you do not enter a value for the Power Rating of the equipment you’re monitoring the MOVUS AI cannot calculate the Inferred power usage and will display a padlock.

Other information

Running Status: Whether or not that equipment is running based on the most recent sample. The fan spins to indicate running and is stationary to indicate not-running. This condition is dependent on the Running Cut-off being set properly, to do so, see our article here.

Notifications status: Shows you if someone has muted yellow advisory alarms from the equipment.

FitMachine Condition Status (First Column): Indicates whether the equipment requires your attention. The status will reflect if:

  • The equipment is in a healthy condition
  • The equipment has recently experienced an alarm, and what type
  • The FitMachine is experiencing network (communication) issues
  • The FitMachine has a low battery, or 
  • The FitMachine is not-reporting. 

The urgency of the matter is expressed through the colour of the status. Green indicates normal, yellow is a warning, and red indicates critical. If the asset is experiencing more than one issue, for example, it has recently experienced a significant condition change (red alert) and has a low battery, only one will be shown at a time. The most urgent matter will be shown. You can filter the status column to show the matters most relevant to you. 

What else should I look at?

These are some of our related articles:


Thanks for reading. As always, if you have any questions or concerns please reach out to MOVUS Support here.